Fire Security System

Save Lives. Alert Inhabitants Soon and Often.

In some states, the fire death rate is above 30. To combat high fire death rates, businesses and residents must incorporate prevention methods to protect people. Without prevention tactics, lives may be lost in fires or related catastrophes.

A fire security system is most commonly used in commercial businesses. Systems may also be found in residential buildings with shared hallways. A typical fire security system is designed to keep the inhabitants of a building safe by alerting them to evacuate when a fire occurs. Alarm systems are customized by fire security system specialists to protect property and people.

Select a Design in Accordance with Local Building Codes.

A fire alarm system should be designed according to local building codes. Smoke detectors are used in conjunction with a fire security system in most instances. The laws will dictate which components should be included in the design for maximum security.

Since building codes vary from region to region, it is important to know local laws. During installation, a project architect or engineer may examine the local building codes to ensure the fire alarm system is in compliance. Compliance will be determined by the National Fire Protection Association (NFPA). Fire alarm systems must be designed and installed according to these standards in the United States.

Be Aware of Different Components of a Fire Alarm System.

A fire alarm system consists of a control panel, monitoring devices, a dedicated power supply, a backup battery power source and a manual alarm pull. Smoke or heat detectors should also be included to detect the signs of fire. These devices are excellent for early detection.

Strobe lights, buzzers or horns are commonly used for fire alarm systems, but are slowly being replaced by systems with repeated spoken phrases. The voice guides inhabitants to safety and away from smoke and fire.

Select a System Suitable to The Building Type.

Manual and automatic systems are available to protect buildings. Manual systems simply consist of a group of pull handles. The systems can be activated by a switch or some other mechanism. Automatic systems sense smoke and fire through sensors and other advanced technology. The detectors of heat, smoke and fire will be placed on ceilings and walls. Advanced systems may also detect toxic gases or chemicals. Experts can help determine how many detectors are required and the proper placement of the devices to meet standards in NFPA 72.

Both visual and audio cues must be present to remain in compliance with the American with Disabilities Act. According to statistics, this affects nearly ten percent of deaf or hard of hearing Americans. Flashing lights or audio voices are the most common forms of alerts for disabled people.

Use Auxiliary Systems with a Fire Security System for the Best Protection.

Auxiliary systems are designed to contain the fire when inhabitants cannot escape the fire. This system may consist of fire doors held open by magnetic holders. When fire is detected, the doors are released automatically to contain the fire in the area where it originated.

Fire requires oxygen to grow. Effective auxiliary systems will shut down fans to prevent the spread of fire and smoke. Fire proof doors are also effective in stopping the fire and smoke from spreading. People, not in the immediate area of the fire, can escape relatively unscathed when auxiliary systems are in place.

Contact a Representative for a Free Consultation.

Contact a representative to find the best solution for a business or residence. Experts understand all of the rules and regulations concerning fire safety. Even if a fire occurs, an effective system will alert everyone and help them exit the building in an orderly fashion. Casualties are minimized when proper systems are in place. Do not delay contacting a business person today to design a customized solution.